In places where nature ends GCP break occurs. Where GCP sides of the problem is not connecting. Wooden floor, they attach to the metal profiles and screwed gypsum. On the floor nobody nelipa, movement may be limited to what naturally can "walk" the tree. Glaistytojas on the flat end put a mesh the same as on the flat sides.
Is it possible something done that should nesuskilinejusias ceiling, and how?

Gypsum had to make a double. Although it is not a guarantee. In a word if it is not actually speak.

Unfortunately I have to agree. The wooden floor from heat wood walks. I
Karavan is to say, but a long "cracks" me defeated. The most convenient
watching to the top, I know from experience after half a year and forget everything
it anymore.

Will certainly be cheaper to leave your micro cracks rather than making them both loaded
money and nerve issue.

I helped some kind of similar situation in the very thinnest glass Wallpaper capping his uzpakliavimas and staining. The white, one proposed by some sort of

I used the canal, but for me it is * ISO, due to the 5 or 6 transverse joints,
krapsciau to 4 times out, and again gruntavau spreadable.
Then ask people and spreads Knauf Uniflotu - helped, but uncertain
for the time being.

Garindamas dry canal water from the self, resulting in cures and different
still shrinking, and if it offers a very dense in itself bedziudamas missing.
Uniflotas cures almost all the same and I have torn yourself. Sometimes it
helps.

This option (double gypsum). Unfortunately .....

tested way:
the angle spakliuotes iskrapstyt spakliu breaking force place after primer
spaklius, sanding, priming, spaklius, sanding, priming, spaklius,
peeling. completed in a few days again rolled out cracks. learning approaches applied
3 times in any two men. nusispjauta and was adapted to its above
recipe, not to look at the ceiling Luxury way, as crack anymore, and even
Visitors display a note.

ps. Apartment "new building"

There are 2 ways - the first is no longer available. need to make a double frame, rather than
plaster, and so do not walk, the second - fiberglass wallpaper glue. but
Here again the nuances. difficult - tearfully piece together the seams, in addition it is difficult to stick,
adhesive should be applied on the same wallpaper that įmirktų, etc. I do not wish anyone
such work.

spec.profilių system is (and that of the same Knauf)
frame designed to be attached only to walls, ceilings nesitvirtina

so about half the house was used for this spec.profilių system žiūrėsim how the results (don everything ok, but only the first season, early to draw conclusions)

but the problem is that if the room size larger> 4m, still need to use thicker profiles, and the system is išbrangsta.
Our site is approximately 5 x 8 m - paskačiavome that materials would cost only about 100 EUR/m2. (Smaller rooms where wall 4 x 4, the price of materials, some 40 EUR/m2).

Thus, a simple version of the site selected, double gypsum, and yet somehow exciting master turned to plaster over not hold up to 1-2 mm wall (to put some sort of perimeter metal edges). In his opinion there would also be somewhat protected from rupture. It will apparently.