I choose option 2 between skirting boards.
Option 1 has special groove and fastened "uzmaunant" on a special
to wall metal "clip".
Here everything is nice and clear.
Option 2: no spec. notch.
Whereas, brick wall + plaster + paint, the seller offers simply drilled in the wall
holes in the knock up wooden sticks at them, which I later nailed baseboards.
maybe is there any alternatives?
Sticking to the wall (liquid nails, silicone)
Option mediocre as a pressing need to tackle irregularities
question.
You can turn the tape on the wall, as was turning the screws placiom ploksciom
heads. After gluing Kleiberit, I do not remember the model-speaking, which are building
Silicon handgun .. Why? Ugly head bolt on the oak
skirting boards, do not rely on glue-joint paint, plaster-wall (especially because
skirting the array, but they are not perfect straightness to be pressing ..)
For Kleiberit I have not found anything better. Liquid nails did not like due to elastic
and a very long kietelimo. City grows a little glue and a hardened
1-2 hours.
Someone once pointed out, glued to the two-sided tape lipinimo and everything ok. Well, but due to rebound it, if properly painted - neatsoks, and if detachment - and then think What if
I plastered wall becomes very simple as follows:
swabs plinths with glue, put pieces on the wall, you start to 1mm grazhteli, pergrezhi
plinths and nailed vinuku much like 1.4mm or not full.
After the glue sudzhiuna ishtrauki vinukus uzhtepi medzhio and icing. Then
assertion you can not see, unlike the mounting varzhtais. And makes it quick and easy.
If the wall roughness is low (and what should be plastered wall
case) i vinukai fits very well and really like prispaudzhia
belongs. Pac bishki doubts shit ish affair but I was pre-
surprised how ish things get really easy - ish ishsinuomaves
goto angle cutting machines 170m2 house plinths folded over one weekend.
Option 1 nebesirinkciau, nusimauna from the racks, especially where small
pieces. Brutally annoying.
Related Articles:
Comments