2010-07-04

what do you think gluing on the gypsum
wall / ceiling? What are the main disadvantages (halogens unnecessary for me)?
Material price looks very attractive - the result of 12lt/m2 (cardboard
and Knauf perlfix "glue). Plastering, filling probably even more expensive
atsieitu (one material)? O and surface quality should be improved carton.

ner if any vibration, nothing at all, and the sizing, but the values ​​are paying
levels and would not give any glued :) :) atgrubnagiam but otherwise the glue ner
cheap as far as I remember.

Bonding is appropriate when you're not comparing a large area, just in one
except a small wall, but no more

Discourage any way glued and ceiling gypsum. There will be a hassle.

Profiles in the case of the above mentioned profiles on the ceiling, aligns
slowly the whole area and tighten the plaster. As a way of bonding have been made
just - I do not know ...

With a spirit level and a hammer siaip. Tried, only numbers as does the number of the complicated do not know.

You can still beacons' majaciokus "susidelioti GIPSA concise and gluing
to them, you should receive adequate levels.


3


Related Articles:

  1. Tiling (AP)
  2. Glass fabric glue
  3. Partitions and ceiling installation with GCP (AP)
  4. Wall luting
  5. Wall Fill / painting - material and other nuances
Categories: Interior decoration | Tags: ,
You can follow the article with the RSS 2.0 feed . You can leave a response , or follow the article from your own site.

3 comments

  1. A
    Nerkashis

    All homes knock plaster. Here and there on the profiles, others glued. Counted and the same, stick the cheapest, but certainly not the easiest. I am self-taught, it is ideal for me will never go. When įgundi, very simple. Above all good "išsimatuot" wall with spirit level. The first sheet of drywall first. All other aligned after the first.
    A quick pončkas and presses. The best comparison to the long picket (straight), or aluminum with a ruler (or as it may call it). The remaining glue on the edges tucked between the wall and plaster. So far, none of the board neatšoko.
    Glued on the ceiling - suicide. I have no idea how it's done.

  2. 2
    Blakes

    Niek te ner, sumeti phantom and on plokste droop and hang ..

  3. 3
    Vytautas

    I did the ceiling profiles. The walls are made equal to it all glued L / c. Used a glue ekogips Polish (bags of plaster). The sheet is spreadable all-through-the result of large comb-Lux was covered with two layers. If you are building is between 0 and 9 times the measure of one go. And not have to bother with the alignment, turns corners, etc.

    Leave a comment


    468x60.lt