7 comments

1. A

   ve
   

   Visual medzhiagoje machi, the Installation of gypsum ceiling perimeter, where pertvarom bound to put the tape kzhkokia uzhrashais Knauf. do not know precisely described. maybe zhino about what language is and what the band?

2. 2

   by admin
   

   slip band.
   requires that the frosting seams GCP sticking to the wall. theory
   a - Cracks appear in all cases, this should result in accurate
   the intended location and regular shape (thin thread). the junction
   (With wall plate) loaded elastic sealant (acrylic)

3. 3

   by admin
   

   Tip of the door frames by making use of the profile of UW paparasciau will be installed (not visible in the photo pjaustimu have a partition in conjunction kabeliu.I on the profile of which is mounted in the door the same width Bookmark and thorium wooden Brus (on both sides and top), so i will be reinforced by design reduced vibration butchering duris.medinis frame display far stronger than the metal profiles at the door so better to put more serious Brus. GIPSA is not turning the two plates of gypsum intercourse at the door corners, because over time suskilines seams.

   used instead of the bolt lock Buy in profiles tool is no longer needed to bolt connecting profilius.sutaupysit EN

   When installing be sure to use the UW called Tapes, tape it to your profile to reduce the vibration noise, it is glued onto the profile fitting and the ceiling and floor and wall, and (if concrete).

   The first fully assembled ceiling partitions later, otherwise than obey the race profile of the ringing.

   Frame houses electrical wiring must necessarily serve as packaging for corrugated i reduces the probability of fire and is a necessary safety measure against gaisro.Pati corrugated is not flammable, it has become frayed and allows only the smell (not talking about a high temperature when everything is lit open flame) ignition source, it does not allow cable to get enough oxygen to create the open fire, and so is svylimas. When installing the wires to the profile shape and cut x atlenkita angle of cut cables sumazinsit opportunity vedziosis easier installation.

   Installation of a partition on a heated floor (uw to the floor) do not need to fear that a heated pataikysit vamzdeli If you use mazesnes fixing dowels or inserts Pluralism padarysit platforma.bet easiest to bookmark where you go vamzdis.tam optional scratch the entire floor just to know how and in what form isdestiti heated in a grandson:

   such as the installation of heated floor, first row goes 15cm from the wall and bend back gryzta every 15 cm (central axis) is actually a gap of about 11 cm. meters and stretch you can see whether or not the tube.

4. 4

   Evaldas
   

   I wanted to ask, I am going to install a second floor rooms and the frame, that is, Rename, and the ceiling, do a tree. Is it possible to turn the GCP to a tree, or I still feel going to require profiles and turn to them?

5. 5

   by admin
   

   certainly possible, somehow abroad, mainly from the wood and makes, just maybe longer it takes less work to do to neskilinetu later. Read that and here: http://www.knauf.lt/www/media/pdf_prie_produktu/baumarktas/D61_LTmansarda.pdf there are examples of how can I not login and be the wooden structure and metal profiles

6. 6

   Evaldas
   

   Welcome to
   I would like to inquire who worked in the opinion of the GCP, GCP think the firm is to choose Knauf and Rigips. Rigips sought cheaper and it might want to inquire sometimes ugly quality and this could not save more, and instead choose Knauf, or maybe the same thing to the devil.

7. 7

   N.
   

   Welcome to
   Maybe you can have a video as a wooden frame pertvarom or what samples to give the profile I would say a lot easier, but the VA is going to have a partition from the tree I would become. thank you