need advice - Decision ...
Own a house (1982 construction) in which we live has 2 drainage
settling pit yard. Well the first city sewer -
fasadineje side of the building - on the street. 20 years ago to the city sewage system
tracks were subdued, not plumbers from Kaunas Water "and the building owner
with talc and spades (and did so all the neighbors in the village). All
subjected to dig ditches and laid vamzduka from one of the deposition
well will ... under the house. The connection length - about 30-50 meters. All
formally agreed and enacted at that time.
Problem.
Connection of the house - somewhere clogged and not working. Last spring,
was once again the extraction wells, "snake" a little help
prakrapstytas the pipe running under the house and the problem will disappear. After
a few months, everything is blocked again (?). As a result - both deposition
wells are full to chock-full (for the second time this year will need pumped). And
most importantly - constantly flying and smells of cellars, basements as a response
formed, which was once planned lavatories.
How to solve problems?
Does the system should be dismantled and the city sewer pasijungt again
as well as they should (need to dig new trenches, formation of a new well is
one, etc.)?
Can we try repair the existing system, to lay new pipes or the like.? If this is
What would you recommend it?

KASCO the same talc and spades naxrien the tube (Of course
belong pasibandymui atsikast it personally Metra only) and any new klocius
Diameter and 200 talkovai klocius. Warranty - dig you will find 100
diameter pipe with a poorly sloped and what it's wife pantyhose
Sudais apkibusia elephant ...
new water well will be expensive.
takes the view

And I would suggest is first try to hire the washing machine, where
high pressure wash. Tights wife will bear "naxrien. However, if 20 years
time, and probably another 20 to be considered.

We also omit the path before there was even Ancient kanaleikos lay the pipe,
This is a long time kimshdavosi several times a year, and the coil (already had a net
50 m long) position only briefly. Then, washing mashine jamem where aukshtu
pressure wash to the pipe - as early as 5 m (TFU TFU) problem anymore.

may still be poorly made ​​inlet and outlet of the well should be similar to here:

Otherwise, the floating ... clogs the pipes, and even better to be connected directly (the pipe into the pipe) and accrued no wells. Of course now reworked a very pleasant job.

Related Articles:

1. Water Protection Zone - how to solve the problem?