Why are flashing LED lights off?
2010-08-18

I picked up a pair of 3W (3x1W) led'iniu bulbs with GU10 cap, well
instead you halogeniuku into suspended ceilings ...
And what ... they turn off the light twinkles on the moving kokek every 5 sec. This one is
the other, the two together ... light on the button backlight ...
Suspicion here that the backlight bulb spend some streams
LEDs and it is sufficient that ... What mirgtelt advised to solve this
they will switch without changing the i of such works without the backlight bulbs?

issiardai switches and cuts the backlight lempike nafik
not only flashes cream, fluorescent and LED on only darkness. so
I would say even kraupokai :)

All lamps Novel, which has a cond - requires AC voltage
Pulsation Reduction on
So that these conditioning is charging in a neonkes jungiliuose.
When uzsikrauna so that sufficient uzsidegti lamp - lamp and lands mirktelna cond.
And again everything from the beginning.
And when there is an additional cond - this is a lifetime of resistance, the main scheme.
Due to the lamp fails cond - Blitz does not work.
This obviously ner very good - but maybe someone know the better way to (switch neonke thrown out?)


A


Related Articles:

  1. Fluorescent lights or saving?
  2. What could be cost-effective adoption of the staircase lights neišvogtų?
  3. The LED bulbs
  4. What better ballast fluorescent lamps?
Category: Lighting , Energy | Tags: ,
You can follow the article with the RSS 2.0 feed . You can leave a response , or follow the article from your own site.

5 comments

  1. A
    Other

    The tried, but can keep a very small drain of be. Modern
    lamps is sufficient. And why the voltage tester, a screwdriver inserted into the socket of the finger lights? Or switch retorts at the phase and neutral!

  2. 2
    Elephant

    Issiardai the switch,
    ismeti backlight that illuminates
    its local resistance can have inserted the + LED + diode
    assemble everything in reverse order

  3. 3
    Andrew

    mirgsejo and to me, had all ishimti ish backlighting jungkiliu you, also counted when received savings have changed from 10 ... 20 halogen bulbs to LED (Buy here: http://www.spinduolis.lt ), now 10 incandescent bulbs burn as one, paid off after a while

  4. 4
    Ramunas

    what kind of problems ..... affects the switches and LED blinks ends
    sorry but I have money again :-)

  5. 5
    Niekselis

    The easiest solution to change the radio button for simple systems without the backlight flickering and all will end, because the backlighting switches, and therefore spend a current LED light blinking, no backlight affects the blinking disappears nedraskant lamps and without anything else

    Leave a comment


    468x60.lt
    "
    "